ATI Tool Changer Products: QC-113

QC-110 locking mechanism, providing excellent strength-to-weight ratio.
No-Touch locking technology allows up to 0.12 inch (3.0 mm) plate separation when locking.
Patented Fail-Safe locking mechanism design results in low force acting on the piston.
Large piston diameter and outward ball travel increase moment capacity.
All locking parts made of Rc58 stainless steel.
Internal Lock/Unlock sensing reduces stack height.
Utilizes the same air and valve adapters as the QC-210.
Utilizes the same sensor options as QC-210.
Four (4) mounting flats to attach standard ATI ledge-mount utility modules.
Custom mounting pattern matches the Nitta XC-60.

QC-113 Tool Changer (Master and Tool)

伺服模块

模块	类型	描述	备注	需要过渡板
EC6	伺服模块	Servo Module with (1) M23 8-pin Servo Power Connector, (1) M23 12-Pin Servo Signal Connector, (1) Turck Mini 5-Pin DeviceNet Signal Connector, and (1) Turck Mini 4-Pin DeviceNet Power Connector	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
EF16	伺服模块	Servo Module with (3) Amphenol Connectors and (2) M12 Eurofast Connectors on the Master side and (3) Amphenol Connectors and (2) M12 Eurofast Connectors and (1) 1/2-20 UNF Microfast Connector on the Tool side	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
EF17	伺服模块	Fanuc Servo Module with 7-pin Motor Power/Brk Connector and Battery Backup	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
EF19	伺服模块	Fanuc Servo Module with 4-Pin Power Connector	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
EF50	伺服模块	Fanuc Servo Module with 4-Pin Power, 17-Pin Encoder, Adaptive Weld Connects, 4-position Terminal Strip, No Brake. Tool side has 5-Pin Female Battery Backup, 4-position Terminal Strip.	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
EF64	伺服模块	The EF64-M/T has been designed for new FANUC motors, encoders used with new GM robots, ARO carried servo weld guns. Module passes servo motor power, FANUC encoder and secondary weld feedback. A protective, anti-tamper bracket has been added to the EF64-M to protect encoder connector and to prevent accidental disconnection.	Flat C. Will mount to Flat B and D but may interfere with modules on adjacent flat.	No
EF9	伺服模块	Servo Module Assembly with FANUC/MILCO Specifications with (2 Amphenol Connectors, (1) M12 Connector, and 4-position Terminal Strip	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
EN56	伺服模块	Radial Electrical Module with 4-Pin Female D-Coded M12 Ethernet Connector and 4-Pin Minifast Power Connector Pass-through	Flats B, C, D; Apps Approval; Requires adapter rails. Rails with more than 4 positions may interfere with modules on adjacent flats. Will extend above Master and Tool body.	Yes
RES10B	伺服模块	Servo Signal Module with 12-pole, M23 Connector, STP Wiring		Yes
RES17	伺服模块	Servo Signal Module with 17-pole, M23 connector		Yes

信号控制模块

模块	类型	描述	备注	需要过渡板
DA4	DeviceNet 快速连接模块	DeviceNet Module with (2) Mini Connectors for DeviceNet and Aux. Power Interface. Supports Double Solenoid Valve with TSI on Master. Arc Prevention applied to Aux1, Aux2, and CAN V+ power. Lock, Unlock, and RTL sensing with LED cables on the Master. Tool-ID from the Tool module also supported.	Flat A with J-module	No
DB10	DeviceNet 快速连接模块	Quick Connect Capable DeviceNet Module with (2) Mini Conn for DeviceNet and Aux. Power Interface, TSI on Tool, Arc Prevention applied to Aux1, Aux2, and CAN V+ power. Lock/Unlock/RTL Sensing, LED Cables on Master. Tool-ID from Tool module also supported.	Flat A with J-module	No
DB10Z1-M,DB10-T,DB13-T	DeviceNet 快速连接模块	Quick Connect Capable DeviceNet Module with (2) Mini Conn for DeviceNet and Aux. Power Interface, TSI on Tool, Arc Prevention applied to Aux1, Aux2, and CAN V+ power. Lock/Unlock/RTL Sensing, LED Cables on Master. Tool-ID from Tool module also supported.	Flat A with J-module	No
DB12-M,DB10-T	DeviceNet 快速连接模块	Quick Connect Capable DeviceNet Module with Arc Prevention, no TSI Bypass, Block Latch without Tool	Flat A with J-module	No
DB12-M,DB13-T	DeviceNet 快速连接模块	Quick Connect Capable DeviceNet Module with (2) Mini Connectors for DeviceNet and Aux. Power Interface, TSI on Tool w/ No RTL Bypass and Latch Disable Function, Arc Prevention applied to Aux1, Aux2, and CAN V+ power. Lock, Unlock, and RTL sensing with LED cables on the Master (RTL Sensors in Series). Tool-ID from the Tool module also supported	Flat A with J-module	No
DB15-M,DB10-T	DeviceNet 快速连接模块	Quick Connect Capable DeviceNet Module with (2) Mini Connectors for DeviceNet and Aux. Power Interface, TSI on Tool, No RTL Bypass, Arc Prevention applied to Aux1, Aux2, and CAN V+ power. Lock, Unlock, and RTL sensing with LED cables on the Master (RTL Sensors in Series). Includes 3-Pin M8 Connector for Air Supply Pressure Monitoring. Tool-ID from the Tool module also supported.	Flat A with J-module	No
DB2	DeviceNet 快速连接模块	DeviceNet Module, Supporting an Integrated Valve with Tool Stand Interlock (TSI) on Tool	Flat A with J-module	No
DD3	Insta工具模块	InstaTool™ DeviceNet Module, Standard Mini Connectors, TSI on Tool, CEM	Flat A with J-module	No
DKD	EtherNet/IP模块	EtherNet/IP Module supports DHCP functionality with DeviceNet and Aux. Power pass-through, TSI on Tool, supports Tool-ID. Arc Prevention Circuit applied to Aux. Switched, Aux. Unswitched, and DeviceNet Power.	Flat A with J-module	No
DKF	EtherNet/IP模块	EtherNet/IP Module with integrated Ethernet switch, supports DHCP functionality and EtherNet/IP Quick Connect	Flat A with J-module	No
DKG-M,DKF-T,DKQ-T	EtherNet/IP模块	EtherNet/IP Module w/integrated switch supporting DHCP, Quick Connect, Input and Switched Auxillary Power pass-thru, TSI on Tool. M12 D-coded Connector for Ethernet communication, Mini 4-pin Connector for Input power/Switched Aux Power. Lock/Unlock/RTL.	Flat A with J-module	No
DKK-M,DKF-T	EtherNet/IP模块	EtherNet/IP Module with integrated Ethernet switch supporting DHCP functionality and EtherNet/IP Quick Connect, Input and Switched Auxillary Power pass-through, Non-RTL Bypassed TSI on Tool. M12 D-coded Female Connector for Ethernet communication, one Mini 4-Pin Male Connector for Input power and for Switched Auxillary Power. Lock, Unlock and RTL sensing with LED cables on the Master and Tool-ID from the Tool module are also supported. Arc Prevention Circuit applied to AUX Switched and Input power.	Flat A with J-module	No
DKL	EtherNet/IP模块	EtherNet/IP Module with Integrated Ethernet Switch, 4-Pin M12 D-Coded connector for Ethernet communication, 4-Pin MiniFast Connector for Input and Output Power, TSI on the Tool, Arc Prevention applied to Input and Output power. Lock, Unlock, and RTL sensing with LED cables on the Master. Tool-ID from the Tool Module also supported. Safety circuit meets ISO13849 PLd	Flat A with J-module	No
DKP	EtherNet/IP模块	EtherNet/IP Module with integrated Ethernet switch, supports DHCP functionality and EtherNet/IP Quick Connect, Input and Aux. Power pass-through, TSI on Tool. M12 D-coded Connector for Ethernet communication, Mini 4-Pin Connector for Output, Input and Logic Power. Lock, Unlock and RTL sensing with LED cables on the Master and Tool-ID from the Tool module are also supported. Supports RTL Bypass with both sensors in series. Arc Prevention Circuit applied to Aux. Switched and Aux. Unswitched.	Flat A with J-module	No
DKR	EtherNet/IP模块	EtherNet/IP Module with integrated Ethernet switch, 4-Pin M12 D-Coded connector for Ethernet communication, Mini 4-Pin Male Connector for Switched and Unswitched Auxiliary Power, 5-Pin M12 to support TSI on the Tool, 4-Pin M12 Connector to support Thermal 1 Input, 0-99999 Tool-ID through to the Master moduleTSI on the Tool, Arc Prevention applied to Switched and Unswitched Aux power. Lock, Unlock, and RTL sensing with LED cables on the Master. Tool-ID from the Tool module also supported. Safety circuit meets ISO13849 PLd	Flat A with J-module	No
DKRZ1	EtherNet/IP模块	EtherNet/IP Module with integrated Ethernet switch, 4-Pin M12 D-Coded connector for Ethernet communication, Mini 4-Pin Male Connector for Switched and Unswitched Auxiliary Power, 5-Pin M12 to support TSI on the Tool, 4-Pin M12 Connector to support Thermal 1 Input, 0-99999 Tool-ID through to the Master module. Matching Ethernet ports on Master and Tool. TSI on the Tool, Arc Prevention applied to Switched and Unswitched Aux power. Lock, Unlock, and RTL sensing with LED cables on the Master. Tool-ID from the Tool module also supported. Safety circuit meets ISO13849 PLd.	Flat A with J-module	No
DKS	EtherNet/IP模块	EtherNet/IP Module with integrated Ethernet switch supporting DHCP functionality and EtherNet/IP Quick Connect, Input and Switched Auxillary Power pass-through, Non-RTL Bypassed TSI on Tool. M12 D-coded Female Connector for Ethernet communication, one Mini 5-Pin Male Connector for Input power and for Switched Auxillary Power. Lock, Unlock and RTL sensing with LED cables. Tool side has 0-9 Tool-ID switches.	Flat A with J-module	No
DL10	PROFINET模块	PROFINET Module with integrated Ethernet switch, D-Coded 4-Pin M12 connector for PROFINET communication, 5-Pin Mini Connector for US1 and US2 power, TSI on the Tool, Arc Prevention applied to US1 and US2 power. Lock, Unlock, and RTL sensing with LED cables on the Master. Tool-ID from the Tool module also supported.	Flat A with J-module	No
DL12	PROFINET模块	PROFINET Module with integrated Ethernet switch. D-Coded 4-Pin M12 connector for PROFINET communication, 5-pole Mini Connector for Switched and Unswitched Auxiliary power. Arc Prevention applied to Switched and Unswitched Auxiliary power. Lock, Unlock, and RTL sensing with LED cables on the Master. Tool-ID from the Tool module also supported. Safety circuit meets ISO13849 PLd.	Flat A with J-module	No
DL16	PROFINET模块	PROFINET Module with integrated Ethernet switch, D-Coded 4-Pin M12 connector for PROFINET communication, 5-Pin Mini Connector for US1 and US2 power, TSI on the Tool, Arc Prevention applied to US1 and US2 power. Lock, Unlock, and RTL sensing with LED cables on the Master. Tool-ID from the Tool module also supported.	Flat A with J-module	No
DL4	PROFINET模块	PROFINET Module with RJ45 Push-Pull Ethernet and 5-Pin Push-Pull Power Connectors, Arc Prevention. 0-99999 Tool-ID. TSI on Tool side.	Flat A with J-module	No
DL8	PROFINET模块	PROFINET Module with integrated Ethernet switch, RJ45 Push-Pull connector for Ethernet communication, 5-Pin Push-Pull Connector for US1 and US2 power, 10-Pin Push-Pull Hybrid Connection, TSI on the Tool, Arc Prevention applied to US1 and US2 power. Lock, Unlock, and RTL sensing with LED cables on the Master. 5-digit Tool-ID from the Tool module also supported. Safety circuit meets ISO13849 PLd.	Flat A with J-module	No
DR2	DeviceNet通过模块	DeviceNet and Auxiliary Power Pass-through Module	Flat A with J-module	No
DT2	Ethernet/EtherNetIP/EtherCAT/PROFINET 100Mb通讯模块	EtherNet/IP Pass-through Module w/Aux. Power Pass-through for Utility Coupler Applications.	Flat A with J-module	No
DT4	PROFINET模块	PROFINET Pass-Through Module w/ Aux. Power Pass-Through for Utility Coupler Applications. M12 D-coded Female Connector for PROFINET communication, Mini 5-Pin Male Connector for Switched and Un-Switched Aux. Power circuits. Two (2) M12 4-Pin Connectors for Connection Verification signal and Arc Prevention Control. Arc Prevention Circuit applied to Aux. Switched, Aux. Unswitched.	Flat A with J-module	No
DU2	DeviceNet模块	DeviceNet Module with (2) Mini Connectors for DeviceNet and Aux Power Interface. Supports Dual Single Solenoid Valve Adapter. Arc Prevention applied to Aux1, Aux2, and CAN V+ power. Supports NPN Lock, Unlock, RTL (in series) sensors. Tool-ID on Tool side.	Flat A with J-module	No
DU3	DeviceNet模块	DeviceNet Module with (2) Mini Connectors for DeviceNet and Aux. Power Interface. Supports Double Solenoid Valve Adapter. Supports Air Supply monitoring via Pressure Switch input. Arc Prevention applied to Aux1, Aux2, and CAN V+ power. Supports NPN Lock, Unlock, Thermal 1, and RTL sensors (RTL sensors in series). Tool-ID from the Tool module also supported.	Flat A with J-module	No
SA10	离散的模块	Discrete, 24-Pin MS3102 Connector, Supports NPN Lock, Unlock, and RTL Sensors (RTL in Series), No Integrated Valve Control, No Tool-ID or TSI on Tool.	Flat A with J-module	No
SA12-M,SA2-T	离散的模块	Discrete Module, 19-Pin MS3102 Connector, Supports PNP Lock, Unlock, and RTL Sensors, No Integrated Valve Control	Flat A with J-module	No
SA2,SA3	离散的模块	Discrete Module, 26-pin Amphenol, 19-pin Block, Supports Lock/Unlock/R1/R2 Sensors, Tool ID on Tool side. (Not intended for use with an integrated valve.)	Flat A with J-module	No
SC29	离散的模块	Harting Module, Supports Servo Power and Redundant Encoder and Ethernet Signals, Supports L/U/R1/R2 Sensors and Integrated Valve, Supports TSI on the Tool with no RTL bypass.	Flat A with J-module	No
SC30	离散的模块	Discrete Module, 25-Pin HAN-D Harting Connector, 5-Pin Minifast Aux Power and 4-Pin M12 D-Coded Connector with Redundant PROFINET Pass-Through, Supports L/U/R1/R2 Sensors and Integrated Valve, 0-9 Rotary Switch Tool-ID, Supports TSI with no RTL bypass on the Tool	Flat A with J-module	No
SC32	离散的模块	Harting Module with Redundant Wiring, Supports Servo Power and Encoder Signals, PROFIBUS/DeviceNet Pass-through, Supports L/U/R1/R2 Sensors and Integrated Valve, Supports TSI on the Tool and Master.	Flat A with J-module	No
SC7	离散的模块	Harting Module, Supports Servo Power and Encoder Signals, PROFIBUS/DeviceNet Pass Thru, Supports L/U/R1/R2 Sensors and Integrated Valve, 0-9 Tool-ID, Supports TSI on the Tool	Flat A with J-module	No
SC8	离散的模块	Harting Module that supports Servo Power and Encoder Signals, PROFIBUS Pass Thru, Supports L/U/R1/R2 Sensors and Integrated Valve, Supports TSI on Tool	Flat A with J-module	No
SD2	离散的模块	Discrete Module with M23, 17-pin connector, Supporting PROFIBUS I/O Block and TSI on Tool	Flat A with J-module	No
VA2	离散的模块	Discrete Module, 26-pin Amphenol, 19-pin Block, Supports L/U/R1/R2 sensors and Integrated Valve, works with SA Tool-side modules, TSI on Master	Flat A with J-module	No
VA6 Family	离散的模块	Discrete Module, 26-Pin Amphenol, 19-Pin Block, Supports L/U/R1/R2 Sensors with Integrated Valve Pass-through VA6-M Supports TSI on the Master Side and Works with SA Series Tools	Flat A with J-module	No
VA7 Family	离散的模块	Discrete Module, 26-Pin Turck M27 Connector, 19-Pin Block, Supports L/U/R1/R2 Sensors with Integrated Valve Pass-through. VA7-M Supports TSI on the Master Side and Works with SA Series Tools	Flat A with J-module	No
VB11	离散的模块	Discrete Module, Supports L/U/R1/R2 PNP Sensors and Integrated Valve, 35-Pin DDK (MS Style) Connector, TSI on Tool, 0-9 Tool-ID, 22 Pass-Through	Flat A with J-module	No
VB12-M,VB13-M,VB12-T	离散的模块	Discrete Signal Module with 36-Pin PT Bayonet Connector, TSI on Master, Supports L/U/R1/R2 PNP Sensors and Integrated Valve (R1 and R2 in Series). (VB13-M connector mounted on Right Angle Spacer Block.)	Flat A with J-module	No
VB18	离散的模块	Discrete Signal Module w/35-pin Amphenol on Master, 24-pin Amphenol on Tool. 5-pin Aux Power, 4-pin PROFINET pass-through, 17-pin and 26-pin blocks.	Flat A with J-module	No
VB2	离散的模块	Discrete Module, 26-pin Amphenol, 19-pin Block, Supports L/U/R1/R2 Sensors and Integrated Valve,TSI on Tool	Flat A with J-module	No
VB5	离散的模块	Discrete Module, 19-pin Amphenol, 19-pin Block, Tool Side Tool Stand Interlock, 10 Pass-Throughs, NPN (sinking) Locked, Unlocked, and RTL sensors	Flat A with J-module	No
VB7 Family	离散的模块	Discrete Module, 26 Pin Amphenol, 19-pin Block, Supports L/U/R1/R2 Sensors w/ Integrated Valve Pass-Through (uses single or double solenoid valve), TSI on Tool and Tool-ID (Mates with VB Series Tools)	Flat A with J-module	No
VB7Z1 Family	离散的模块	Discrete Signal Module with 26-Pin Amphenol, 19-pin Block, Supports L/U/R1/R2 Sensors with Integrated Valve Pass-yhrough (Uses Double Solenoid Valve) **Supports Tool Stand Interlock on Tool Side.	Flat A with J-module	No
VB8	离散的模块	Discrete Module, Supports L/U/R1/R2 NPN Sensors and Integrated Valve, 37-Pin DDK Connector, TSI on Tool, 0-7 Tool-ID	Flat A with J-module	No
VD2	离散的模块	Discrete Module, 26-pin Amphenol, Remote I/O Connection, 19-pin Block, Supports L/U/R1/R2 Sensors and Integrated Valve, TSI on Tool	Flat A with J-module	No
VF2	离散的模块	Discrete, 26-pin Amphenol, 19-pin Block. Supports L/U/R1/R2 Sensors and Integrated Valve. VF2-M Supports TSI on the Tool Side	Flat A with J-module	No
VG3	PROFIBUS模块	Discrete PROFIBUS Pass-through Module	Flat A with J-module	No
VJ4	离散的模块	Interbus Power Pass-through and I/O Connection Module with Arc Prevention	Flat A with J-module	No
VK2	离散的模块	IO-Link Module with (4) M12 5-Pin Connectors for I/O Link Pass-Thru, (3) M12 5-Pin Connectors for Valve Control and Locked, Unlocked, and Ready-to-Lock Sensor Inputs. Supports Integrated Valve Control.	Flat A with J-module	No
VL1	Ethernet/EtherNetIP/EtherCAT/PROFINET 100Mb通讯模块	EtherCAT Control Module Assembly	Flat A with J-module	No

其他模块

模块	类型	描述	备注	需要过渡板
JJ10	适配组件	Dual Ledge Mount Adapter Module	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
JJ16	适配组件	Rail Style, Ledge Mount Adapter, 7-Positions	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
JJ19	适配组件	EN Rail Style, Ledge Mount Adapter, 4-Positions, 1" longer version of the JJ13.	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
JJ2	适配组件	Adapter Assembly - Used to mount Single or Dual J16 pattern modules to QC	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
JJ3	适配组件	Single or Dual J16 Mounting Adapter Assembly (5" Adapter width)	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
JJ6	适配组件	Spacer Module Adapter - Use opposite NA2/NA3 Tool Hooks	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
JL3,JL4	定位模块	Gross alignment module, adapts single or dual J16 pattern modules to QC.	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
JM2	适配组件	Adapter Assembly - Used to mount PG0, PN2, or HA6 modules to QC	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
JM4	适配组件	Adapter Assembly for V300 Module	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
Jxx Air Adapters	气体电磁阀适配器	Jxx Air Adapters	Flat A - Use with Tool Side Spacer Assembly	Yes
Jxx Lock/Unlock Air Adapter with RTL Sensor Inputs	气体电磁阀适配器	Lock/Unlock Air Adapter with Lock/Unlock/RTL sensor inputs with stainless steel hardware.	Flat A - Use with Tool Side Spacer Assembly	Yes
Jxx Valve Adapters Dual Dou Sol Pas Th Prox Pres Sw	气体电磁阀适配器	Jxx Valve Adapters-Dual Double Solenoid, Valve Pass-through, Prox & Pressure Sensors		No
Jxx Valve Adapters with a Double Solenoid	气体电磁阀适配器	Jxx Valve Adapters with a Double Solenoid	Flat A - Use with Tool Side Spacer Assembly	Yes
Jxx Valve Adapters with a Double Solenoid and Valve Pass Through	气体电磁阀适配器	Jxx Valve Adapters with a Double Solenoid and Valve Pass Through	Flat A - Use with Tool Side Spacer Assembly	Yes
Jxx Valve Adapters with a Single Solenoid	气体电磁阀适配器	Jxx Valve Adapters with a Single Solenoid	Flat A - Use with Tool Side Spacer Assembly	Yes
Jxx Valve Adapters with a Single Solenoid and Valve Pass Through	气体电磁阀适配器	Jxx Valve Adapters with a Single Solenoid and Valve Pass Through	Flat A - Use with Tool Side Spacer Assembly	Yes
Jxx Valve Adapters with Double Solenoid Valve Pass Through Pres Switch	气体电磁阀适配器	Valve Adapters with Double Solenoid with Valve Pass-Through and Pressure Switch		No
Stand-alone Dust Covers	其他模块	Stand-Alone Dust Cover		No
UF2	其他模块	Camera Kit - Consists of GB8 Electrical Module, R4 Electrical Module, and JJ14 Mounting Adapter Assembly	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No

气和水模块

模块	类型	安装面	描述	备注	需要过渡板
AA2	气模块		(2) 1/2 NPT self-sealing ports (Master side), (2) 1/2 NPT self-sealing or pass-through ports (Tool side), Air Only Module	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
AB2	气模块		3/8 NPT Ports - (8) self-sealing ports (Master side), (8) self-sealing ports (Tool side), Air Only Module	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
AC2	气模块		(4) 3/8 NPT self-sealing ports (Master side) and pass-through (Tool side), and (2) 3/4 NPT vacuum ports (Master and Tool side)	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
ADx	气模块		Air only module with self-sealing ports = AD2, AD3, AD4, AD5. Air only module with pass-through ports = AD6, AD7.	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
AE2	气模块		(8) 3/8 NPT pass-through ports - Air Only Module (Master and Tool side)	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
AF2	气模块		(8) G 3/8 (BSPP) pass-through ports - Air Only Module	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
AG2	气模块		(4) G 3/8 (BSPP) self-sealing ports (Master side) and pass-through (Tool side), and (2) G 3/4 (BSPP) vacuum ports (Master and Tool side)	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
AH2	气模块		Air Module with G 3/8 (BSPP) Ports - (8) self-sealing ports (Master side) and (8) self-sealing ports (Tool side)	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
AK2	气模块		(10) G 1/4 (BSPP) self-sealing ports - Air Only Module (Master and Tool Sides)	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
AL2	气模块		(2) G 3/4 (BSPP) self-sealing ports - Air Only Module	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
AM2	气模块		(2) G 1/2 (BSPP) Ports, 2 Self-sealing Ports	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
AN2	气模块		Pneumatic module with (6) 3/8 NPT self-sealing ports and (2) 1/2 NPT pass-through ports	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
AP2	气模块		(4) 1/2 NPT self-sealing (AP2 Master and Tool) or pass-through (AP8 Tool) ports - Air Module only	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
AQ2-M,AQ2-T,AQ7-T	气模块		(4) G 1/2 (BSPP) self-sealing (AQ2-M/T) and pass-through (AQ7-T) ports - Air Module only	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
AQ3-T	气模块		(1) G 1/2 (BSPP) self-sealing port - Air only module (Mates with FH6-M) - Tool side only	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
AR2	气模块		(10) Rc 1/4 (BSPT) self-sealing ports - Air Only Module (Master and Tool Sides)	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
AR3	气模块		(8) Rc 3/8 (BSPT) pass-through ports - Air Only Module	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
AR4	气模块		Pneumatic Module with Rc 3/8 (BSPT) ports: AR4 Master - (8) self-sealing ports AR4 Tool - (8) self-sealing ports	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
AR8	气模块		Pneumatic Module with (2) Rc 1/2 (BSPT) self-sealing ports, 3/8 valves	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
AS6	气模块		Pneumatic Module with (10) G 1/8 (BSPP) Pass-Through Ports	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
AV7	气模块		(4) G 3/4 (BSPP) Vacuum Pass-through Modules	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
AV9	真空/气模块		Vacuum Pass-through Module with (1) 2" NPT axial port spaced 163mm from QC	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
AW2	气模块	T	Air Module, (3) 1/8 NPT, (2) 1/4 NPT Pass-through Ports	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	Yes
AW2	气模块	M	Air Module, (3) 1/8 NPT, (2) 1/4 NPT Pass-through Ports	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	Yes
FC2	水/气模块		G 3/8 (BSPP) Ports - (8) self-sealing ports (Master side), (4) self-sealing ports and (4) pass-through ports OR (8) pass-through ports OR (8) self-sealing ports (Tool side)	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
FF3	水/气模块		Stainless Steel Fluid/Air module with (4) 1/2 NPT self-sealing ports	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
FF4,AQ5-T	水/气模块		Stainless Steel Fluid/Air Module with (5) 1/2 NPT self-sealing ports, 3/8 Poppets	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
FH10,AQ4-T	水/气模块		Stainless Steel Fluid/Air Module with (5) G 1/2 (BSPP) self-sealing ports, 3/8" Poppets	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
FH12	水/气模块		Stainless Steel Fluid/Air Module with (4) G1/2 (BSPP) Self-Sealing Ports, 3/8 Valve Components, Nipple Port with Radial Seal	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
FH13	水/气模块		Stainless Steel Fluid/Air Module with (4) 1/2 NPT Self-Sealing Ports, 3/8 Valve Components, Nipple Port with Radial Seal	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
FH6	水/气模块		Stainless Steel Fluid/Air module with (4) G 1/2 (BSPP) self-sealing ports	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
FL4	水/气模块		Fluid/Air Modules with (5) Rc 1/2 (BSPT) Self-Sealing Ports, 3/8 Valves	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
FS2	水/气模块		Stainless Steel Fluid/Air Module with (4) G 1/4 (BSPP) self-sealing, (2) G 1/4 (BSPP) and (4) G 1/8 (BSPP) pass-through ports	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
HBx	液压模块		Hydraulic Module with Pressure Ratings and Pipe Threads as Listed	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No

电模块

模块	类型	安装面	描述	备注	需要过渡板
GD4	电模块		Electrical Module with and with 5-position adjustable M12 4-Pin Connector	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	Yes
GF19 Family	电模块		19-pin, 3 Amp/125VAC electrical module with M16-style quick-disconnect connector and five position swivel	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	Yes

高电流模块

模块	类型	描述	备注	需要过渡板
PA16	初级电流模块	(3) Contacts, #2 wire, 200 Amp, 600V Rating Primary Current Module	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
PA2	初级电流模块	(3) Contacts, #2 wire, 200 Amp, 600V Rating Primary Current Module	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
PA5	初级电流模块	(3) Contacts, #2 wire, 180 Amp, 600V Rating Primary Current Module (Master side) Mates to 9121-PA2-M	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
PB2	初级电流模块	(2) Contacts, #2 wire, 200 Amp, 600V Rating Primary Current Module	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
PB4	初级电流模块	Primary Current Module, (1) contacts, #2 wire, 200A rating	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
PC2	初级电流模块	(5) Contacts, #2 wire, 200 Amp, 600V Rating Primary Current Module	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
PC5	电模块	Power Module, 150 Amp, 5-Contact, #4 Contact Bases	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No
PH3	初级电流模块	Power Module, (3) 600A, 800V Contacts, #2 to #4/0 Cable	Flat C; Will mount to Flat B and D, but may interfere with modules on adjacent flats. Consult Applications Engineering.	No

产品描述和特点

选择一个工具快换装置


		工具快换装置装置应用表格

工具快换装置型号

模块和附件


		模块


		工具支架


		Interface Options


		独立防尘盖板


		QC隔板


		QC校对辅助工具

应用实例和文章

视频演示

Cobot-Ready Products

ATI 工业自动化
1031 Goodworth Dr. | Apex, NC 27539 USA
Phone:+1 919-772-0115 | Fax:+1 919-772-8259

ATI 工业自动化

北京市朝阳区望京SOHO 塔2-C座809室

电话：+86-10-8479 8766

Email：china@ati-ia.com

主页

产品中心

机器人工具快换装置（Tool Changer）

力/力矩传感器

顺从介质连接器

手工换枪机构

Material Removal Tools

Compliance Devices

机器人防碰撞传感器

资料库

术语表

视频

3D CAD Models

软件

公司

新闻

展览会

信誉度申请

工作机会

联系我们

销售与支持

资料索取

驾驶路线说明

Join A3 Today