ATI Tool Changer Products: QC-46

The QC-46 utilizes the same proven locking mechanism as the QC-40Q Series Tool Changer
No-Touch locking technology allows up to 0.1 inch (2.54 mm) plate separation when locking.
Patented Fail-Safe locking mechanism design results in low force acting on piston.
All locking components are made of RC58 stainless steel.
Mounts directly to 100 mm ISO mounting pattern. Also supports additional mounting patterns (see drawing).
Internal, optional Lock and Unlock sensing.
Alignment features in Tool Changer body for greater torsional strength and better serviceability.
Four (4) flats available for optional utility modules. Flat C has center/dual module mounting which allows up to two modules without an adapter.

QC-46 Tool Changer (Master and Tool)

Recommended Modules

Module	Type	Description	Notes	Adapter Plate Required
P186,P186-E	Air Modules	(6) 1/8 NPT or G 1/8 (BSPP) Pass-through Ports Pneumatic Module	Flats A, B, C2, D	No
MT8 Family	Electrical Modules	8-pin, 20 Amp, 500VAC/700 VDC Electrical Module	Flats A, B, C, D	No
R19 Family	Electrical Modules	19-pin, 5 Amp/250VAC electrical module with miniature MS quick-disconnect connector	Flats A, B, C, D	No
TE	Ethernet/EtherNetIP/EtherCAT/PROFINET Pass-Through Modules	Ethernet Pass-through Module with connectors for Ethernet and Aux Power	Flats B, C2, D	No
FN2	Fluid/Air Module	(2) 3/8 NPT self-sealing ports fluid/air module, stainless steel (replaces F02-N)	Flats A, B, C, D	No
JPC	Other Modules	Tool Side Protective Cover for G, M, R, S, and T Series Modules Drawing	Flats A, B, C, D	No

伺服模块

模块	类型	安装面	描述	备注	需要过渡板
RES10B	伺服模块		Servo Signal Module with 12-pole, M23 Connector, STP Wiring		No
RES17	伺服模块		Servo Signal Module with 17-pole, M23 connector		No

信号控制模块

模块	类型	描述	备注	需要过渡板
CV14 Family	信号控制模块	Compact Discrete Control/Valve Module with Locked/Unlocked Sensor Cables, Tool Stand Interlock (TSI), 0-F Tool ID.	Flat D, 9120-CV14xW(N/E/R)-M	No
G5	DeviceNet通过模块	19-pin, 3 Amp/250VAC Electrical Module with 5-pin DeviceNet Connector and 5-position Swivel	Flats A, B, C, D	No
GB8 Family	Ethernet/EtherNetIP/EtherCAT/PROFINET 100Mb通讯模块	Ethernet modules supporting Gigabit speeds, X- and A-Coded Connectors	Flats A, B, C, D	No
GBX	Ethernet/EtherNetIP/EtherCAT/PROFINET 100Mb通讯模块	10 Gigabit Ethernet Pass-Through Module, M12 X-coded	Flats A, B, C, and D	No
RE10	Ethernet/EtherNetIP/EtherCAT/PROFINET 100Mb通讯模块	10/100 CAT5e Ethernet Pass-through Module	Flats A, B, C, D	No
RE5	Ethernet/EtherNetIP/EtherCAT/PROFINET 100Mb通讯模块	Ethernet Pass-through Module with 4-pins and Shield	Flats A, B, C, D	No
RP5	离散的通讯模块	Discrete PROFIBUS Pass-Through Module with B-coded M12 Connector	Flats A, B, C, D	No
TD	DeviceNet通过模块	10-pin, 5 Amp/24V, pass-through DeviceNet and Aux power module	Flats B, C2, D	No
TDEA	DeviceNet通过模块	DeviceNet Pass-Through Module with M12 Connectors Redundant Signals	Flats B, C2, D	No
TE	Ethernet/EtherNetIP/EtherCAT/PROFINET 100Mb通讯模块	Ethernet Pass-through Module with connectors for Ethernet and Aux Power	Flats B, C2, D	No
TES	Ethernet/EtherNetIP/EtherCAT/PROFINET 100Mb通讯模块	Ethernet Pass-through Module with connectors for Ethernet and Aux Power, Axial orientation. Straight connectors on Tool side.	Flats B, C2, D	No
TP	Ethernet/EtherNetIP/EtherCAT/PROFINET 100Mb通讯模块	PROFINET Pass-through Module with connectors for PROFINET and Aux Power, 5-Pin Aux Power	Flats B, C2, D	No

其他模块

模块	类型	描述	备注	需要过渡板
GBXC	工具盖板模块	Tool Side Protective Cover for GBX Modules – Tool side only	Flats A, B, C, and D	No
JJ113	适配组件	Adapter Plate Assembly, Single J16 QC Mounting to (4) J16 Module Mounting	Flats B and C; Apps Approval	No
JPC	其他模块	Tool Side Protective Cover for G, M, R, S, and T Series Modules Drawing	Flats A, B, C, D	No

气和水模块

模块	类型	安装面	描述	备注	需要过渡板
FG2	水/气模块		(2) G 3/8 (BSPP) self-sealing ports fluid/air module, stainless steel (replaces F02-E)	Flats A, B, C, D	No
FG2-M,FG2A-T	气模块	T	(2) G 3/8 (BSPP) pass-through ports pneumatic module, stainless steel (Tool side only)	Flats A, B, C, D	No
FG4	水/气模块		(4) G 3/8 (BSPP) self-sealing ports fluid/air module, stainless steel (Replaces F04-E)	Flats B, C2, D	No
FN2	水/气模块		(2) 3/8 NPT self-sealing ports fluid/air module, stainless steel (replaces F02-N)	Flats A, B, C, D	No
FN4	水/气模块		(4) 3/8 NPT self-sealing ports fluid/air module, stainless steel (replaces F04-N)	Flats B, C2, D	No
P05	气模块		(10) M5 ports for pneumatic pass-through	Flats B, C2, D	No
P14,P14-E	气模块		(2) 1/4 NPT or G 1/4 (BSPP) pass-through ports pneumatic module	Flats A, B, C, D	No
P16M5	气模块		Pneumatic Module with (16) M5 radial/axial pass-through air ports	Flats A, B, C, D	No
P18,P18-E	气模块		(4) 1/8 NPT or G 1/8 (BSPP) pass-through ports pneumatic module	Flats A, B, C2, D	No
P186,P186-E	气模块		(6) 1/8 NPT or G 1/8 (BSPP) Pass-through Ports Pneumatic Module	Flats A, B, C2, D	No
P186A,P186A-E	气模块		(6) 1/8 NPT or G 1/8 (BSPP) pass-through ports pneumatic module (Air or Vacuum service) Ported axially.	Flats A, B, C2, D	No
P188-E	气模块		Pneumatic Module with (8) G 1/8 (BSPP) Ports	Flats B, C2, D	No
P38A,P38A-E	气模块		(4) 3/8 NPT or G 3/8 (BSPP) pass-through ports pneumatic module. Ported axially.	Flats B, C2, D	No
P48,P48-E	气模块		Pneumatic Module with (4) 3/8 NPT or G 3/8 (BSPP) Pass-through Ports	Flat B, C2, D	No
P8M5	气模块		Pneumatic Module with (8) M5 radial/axial pass-through air ports	Flats A, B, C, D	No
V200A	真空/气模块	T	Vacuum Pass-through Module with (1) 2" NPT port, M19 pattern	Flat B, C2, D	Yes
V200A	真空/气模块	M	Vacuum Pass-through Module with (1) 2" NPT port, M19 pattern	Flat B, C2, D	Yes
V200E	真空/气模块	M	Vacuum Modules with G (BSPP) Pass-through Ports, M19 Pattern, Euro Version - Master-side Module - (1) 2" Pass-through Port - Tool-side Module - (1) 2" Pass-through Port	Flat B, C2, D	Yes
V200E	真空/气模块	T	Vacuum Modules with G (BSPP) Pass-through Ports, M19 Pattern, Euro Version - Master-side Module - (1) 2" Pass-through Port - Tool-side Module - (1) 2" Pass-through Port	Flat B, C2, D	Yes
V34	真空/气模块		(1) G 3/4 (BSPP) pass-through port vacuum only module	Flats A, B, C, D	No

电模块

模块	类型	安装面	描述	备注	需要过渡板
D25	电模块		25-pin, 3 Amp/50VAC electrical module with low-power D-sub connector	Flats A, B, C, D	No
G10	电模块	T	19-pin (10 available to the customer), 3 Amp/250VAC, MS miniature MS quick-disconnect connector with 0-99 Tool-ID built inside and 5 position swivel - Tool side only	Flats A, B, C, D	No
G12 Family	电模块		G-Style Adjustable module with M12, 12-pole connector supporting 16 (0-F) Tool ID.	Flats A, B, C, D	No
G14	电模块	T	19-pin (14 available to the customer), 3 Amp/250VAC, MS miniature MS quick-disconnect connector with 0-15 Tool-ID built inside and 5 position swivel - Tool side only	Flats A, B, C, D	No
G19	电模块		19-pin, 3 Amp/250VAC electrical module with miniature MS quick-disconnect connector and five position swivel	Flats A, B, C, D	No
G26 Family	电模块		26-pin Electrical Module, 3 Amp/250VAC, MS miniature quick disconnect connector and five position swivel	Flats A, B, C, D	No
GD4	电模块		Electrical Module with and with 5-position adjustable M12 4-Pin Connector	Flats A, B, C, D	No
GF19 Family	电模块		19-pin, 3 Amp/125VAC electrical module with M16-style quick-disconnect connector and five position swivel	Flats A, B, C, D	No
MT14A-M and MT14-T, MTR14-M and MTR14-T	电模块	M	14-pin, 13 Amp/500VAC/700VDC electrical module. Also available with Modified version with Amphenol connector relocated to mount with connector flange parallel to mounting flat	Flats B, C, D	No
MT8 Family	电模块		8-pin, 20 Amp, 500VAC/700 VDC Electrical Module	Flats A, B, C, D	No
R10	电模块		19-pin (10 available for customer use - See pinout drawing), 5 Amp/250VAC (R19) electric module with (0-99) Tool-ID (Tool side only) (See also R19 Family webpage)	Flats A, B, C, D	No
R12	电模块		12-pin pass-thru module with an M12, 12-pin connector, supports Coherix predator 3D camera power/IO	Flats A, B, C, D	No
R14	电模块	T	19-pin (14 available for customer use - See pinout drawing), 5 Amp/250VAC (R19) electrical module with (0-9) Tool-ID (Tool side only) (See also R19 Family webpage)	Flats A, B, C1, C2, D	No
R17	电模块	T	26-pin (17 available for customer use - See pinout drawing), 3 Amp/250VAC (R26) electrical module with (0-99) Tool-ID (Tool side only) (See also R26 Family webpage)	Flats A, B, C1, C2, D	No
R19 Family	电模块		19-pin, 5 Amp/250VAC electrical module with miniature MS quick-disconnect connector	Flats A, B, C, D	No
R21	电模块	T	26-pin (21 available for customer use - See pinout drawing), 3 Amp/250VAC (R26) electrical module with (0-9) Tool-ID (Tool side only) (See also R26 Family webpage)	Flats A, B, C1, C2, D	No
R26 Family	电模块		26-pin, 3 Amp/250VAC electrical module with miniature MS quick-disconnect connector	Flats A, B, C, D	No
R32 Family	电模块		32-pin, 3 Amp/250VAC with 36-pin MS quick-disconnect connector	Flats A, B, C, D	No
R3-M,S3-T	电模块		4 Amp/250VAC Electrical Module with 3-pin Turck RSFL36 Minifast Connector	Flats A, B, C, D	No
R4	电模块		4 Amp/250VAC Electrical Module with 4-pin Eurofast connector	Flats A, B, C, D	No
RF14	电模块	T	19-pin (14 available for customer use - See pinout drawing), 3 Amp/125VAC (RF19) electrical module with (0-9) Tool-ID (Tool side only) (See also RF19 Family webpage)	Flats A, B, C1, C2, D	No
RF19 Family	电模块		19-pin, 3 Amp/125VAC electrical module with M16-style quick-disconnect connector	Flats A, B, C, D	No
RF26PD Family	电模块		26-pin, 3 Amp/150VAC potted electrical module with M27 threaded connector	Flats A, B, C, D	No
RF4A	电模块		RF4A Electrical Module Assembly with 4-Pin Minifast Connector and High Power Pin Block	Flats A, B, C, D	No
RF5	电模块		Electrical Module Assembly, 5-Pin Minifast Connector, High Power Pin Block	Flats A, B, C, D	No
RF6A	电模块		Electrical Module Assembly, 6-Pin Minifast Connector, High Power Pin Block	Flats A, B, C, D	No
RK12	电模块		Electrical Module with 12-pin pass-through, 12-Pin M23 connector, Power 5 Amps/150VDC, Signal 2 Amps/30V	Flats A, B, C, D	No
RK17	电模块		Electrical Module with 17-pin pass-through, 3 Amp/125VAC, 17-Pin M23 connector	Flats A, B, C, D	No
RK19	电模块		RK19 Electrical Module with M23, 19-Pin Connector, 3 Amps/150 VAC	Flats A, B, C, D	No
RL5	电模块		High Power Electrical Module with 5-pole, M12 L-Coded Connector supporting up to 63V/16A.	Flats A, B, C, D	No
RU10	电模块		10-pin, 5 Amp/250VAC Electrical Module with with a single USB 2.0 connector	Flats A, B, C, D	No
S14	电模块	T	19-pin (14 available for customer use - See pinout drawing), 5 Amp/250VAC (S19) electrical module with (0-9) Tool ID (Tool side only) (See also S19 Family webpage)	Flats A, B, C, D	No
S19 Family	电模块		19-pin, 5 Amp/250VAC inline electrical module with miniature MS quick-disconnect connector	Flats A, B, C, D	No
S26	电模块		26-pin, 3 Amp/250VAC inline electrical module with miniature MS quick-disconnect connector	Flats A, B, C, D	No
SF19 Family	电模块		19-pin, 3 Amp/125VAC inline electrical module with M16-style quick-disconnect connector	Flats A, B, C, D	No
T19 Family	电模块		19-pin, 5 Amp/250VAC Electrical Module with MS cylindrical threaded connector	Flats A, B, C, D	No
TMB	电模块		Pass-through Electrical Module for Multibus signals using a 17-pin M23 connector	Flats A, B, C2, D	No
X7B	电模块		Coax cable module, single contact, BNC connector	Flats A, B, C, D	No
X7C	电模块		High Voltage Module for Ultrasonic Weld Applications, SHV connector	Flats A, B, C, D	No
X7G	电模块		High Voltage Module for Ultrasonic Weld Applications, Isolated SHV Connector	Flats A, B, C, D	No

产品描述和特点

选择一个工具快换装置


		工具快换装置装置应用表格

工具快换装置型号

模块和附件


		模块


		工具支架


		Interface Options


		独立防尘盖板


		QC隔板


		QC校对辅助工具

应用实例和文章

视频演示

Cobot-Ready Products

ATI 工业自动化
1031 Goodworth Dr. | Apex, NC 27539 USA
Phone:+1 919-772-0115 | Fax:+1 919-772-8259

ATI 工业自动化

北京市朝阳区望京SOHO 塔2-C座809室

电话：+86-10-8479 8766

Email：china@ati-ia.com

主页

产品中心

机器人工具快换装置（Tool Changer）

力/力矩传感器

顺从介质连接器

手工换枪机构

Material Removal Tools

Compliance Devices

机器人防碰撞传感器

资料库

术语表

视频

3D CAD Models

软件

公司

新闻

展览会

信誉度申请

工作机会

联系我们

销售与支持

资料索取

驾驶路线说明

Join A3 Today