| |
Módulos de Control y Señal
|
CV14 Family
|
|
|
Compact Discrete Control/Valve Module with Locked/Unlocked Sensor Cables, Tool Stand Interlock (TSI), 0-F Tool ID. |
|
|
|
Input - 24V (+20%/-10%) / 4A
Spare Pass-Through Signals - <50V / 3A
Tool ID - 30V / 100mA |
|
|
|
Módulos de paso de 100Mb Ethernet/EtherNetIP/EtherCAT/PROFINET
|
DT2
|
|
|
Módulo de Paso EtherNet/IP con Paso de Energía Auxiliar. Paso de Energía para las Aplicaciones del Acoplador de Servicios. |
|
|
|
Power Pass-through - 8 Amp/12-30VDC
Signal Pass-through - 3 Amp/250V maximum |
|
|
GBX
|
|
|
10 Gigabit Ethernet Pass-Through Module, M12 X-coded |
|
|
|
Power: 0.6 A / 60 V
Signal: 10 Gbps / CAT6A |
|
|
KE7
|
|
|
Ethernet estilo K (Receptáculo con código D de 4 pines, M12) y Módulo Eléctrico de Energía (Receptáculo de 3 Pine, M8). |
|
|
|
KE8
|
|
|
K Style Ethernet (M12 4-Pin D-Coded Receptacle) and Power (M8 4-Pin Male Receptacle) Electrical Module |
|
|
|
ME10
|
|
|
ME10 Electrical Module, M12 D-Code, M12 L-Code |
|
|
|
Signal (.6Amp/60V max.) Power (4Amp/63VDC max.) |
|
|
ME10A
|
|
|
ME10A Electrical Module, M8 D-Code, M8 A-Code |
|
|
|
Signal (.6Amp/60VDC max.) Power (3Amp/60VDC max.) |
|
|
RE10
|
|
|
Módulo de Paso de Ethernet 10/100 CAT5e. |
|
|
|
RE5
|
|
|
Módulo de Paso Ethernet con 4 Pines y Protección. |
|
|
|
RE8
|
|
|
Ethernet Pass-through Module with 8-pins and Shield |
|
|
|
S5EPD
|
|
|
Ethernet Module with Viton Seals, Potted |
|
|
|
TE
|
|
|
Módulo de Paso de Ethernet con conectores para Energía de Ethernet y Aux. |
|
|
|
Ethernet Circuit - 2 Amp/60VAC max.
Auxiliary Power Circuit - 5 Amp/600VAC max. |
|
|
TES
|
|
|
Ethernet Pass-through Module with connectors for Ethernet and Aux Power, Axial orientation. Straight connectors on Tool side. |
|
|
|
Aux Power - 4 Amps
Signal - 2 Amps |
|
|
TME
|
|
|
Pass-through Module with Connectors for Ethernet, Aux Power, and Servo Power |
|
|
|
Ethernet Circuit - 2 Amp/150V
Aux Power Circuit - 6 Amp/250V
Servo Power Circuit - 6 Amp/250V |
|
|
TP
|
|
|
Módulo de Paso PROFINET con conectores para PROFINET Y Energía Auxiliar, Energía Auxiliar de 5 Pines. |
|
|
|
PROFINET Circuit - 2 Amp/60VAC max.
Auxiliary Power Circuit - 5 Amp/600VAC max. |
|
|
VL1
|
|
|
Ensamble del Módulo de Control EtherCAT. |
|
|
|
EtherCAT - 3 Amp/30VDC max.
US1 Power - 220mA @ 24VDC
US2 Power - 250mA @ 24VDC |
|
|
|
Módulos de Paso de DeviceNet
|
DR2
|
|
|
Módulo de Paso de DeviceNet y Energía Auxiliar (Herramienta DR4 disponible con el Pin Empotrado). |
|
|
|
DeviceNet - 3 Amp max.
Auxiliary Power - 9 Amp max. |
|
|
G5
|
|
|
Módulo Eléctrico de 19 pines, 3 Amp/250VCA con Conector DeviceNet de 5 pines y Eslabón Giratorio de 5 posiciones. |
|
|
|
KD5
|
|
|
Electrical Module with (1) M12 5-Pin Male Connector |
|
|
|
RD5
|
|
|
Módulo eléctrico de 4 Amp/250VCA con ConectorM12 de 5 pines. |
|
|
|
TD
|
|
|
Módulo DeviceNet y Energía Auxiliar de Paso, 5 Amp/24V. |
|
|
|
TDEA
|
|
|
DeviceNet Pass-Through Module with M12 Connectors Redundant Signals |
|
|
|
DeviceNet - 4 Amp/250V
Aux Power - 5 Amp/600V |
|
|
|
Módulos de Paso Discreto
|
RP5
|
|
|
Módulo de Paso Discreto PROFIBUS con Conector M12 de código B. |
|
|
|
|
Módulos de Rápida Conexión DeviceNet
|
DA4
|
|
|
Módulo DeviceNet con (2) Miniconectores para la interfaz de DeviceNet y la Energía Auxiliar. Soporta Válvulas de Doble Solenoide con TSI en el Máster. Prevención Arc aplicada en la energía Aux1, Aux2, y CAN V+. Detección de Bloquear, Desbloquear y RTL con cables LED en el Máster. ID de Herramientas desde el Módulo de Herramientas también soportado. |
|
|
|
DB10
|
|
|
Módulo DeviceNet con Capacidad de Rápida Conexión con (2) Miniconectores para la interfaz de DeviceNet y la Energía Auxiliar, TSI en Herramientas, Prevención Arc aplicada a la energía Aux1, Aux2 y CAN V+. Detección de Bloqueo/Desbloqueo/RTL, Cables LED en el Máster. ID de Herramientas desde el módulo de Herramientas también soportado. |
|
|
|
Control modules - 24VDC
Pass-through signals - 5 Amp/24VDC |
|
|
DB10Z1-M,DB10-T,DB13-T
|
|
|
Módulo DeviceNet con Capacidad de Rápida Conexión con (2)Miniconectores para la interfaz de DeviceNet y la Energía Auxiliar, TSI en Herramientas, Prevención Arc aplicada a la energía de Aux1, Aux2, y CAN V+. Detección de Boquear/Desbloquear/RTL, Cables LED en el Máster. ID de Herramientas del Módulo de Herramientas también soportada. |
|
|
|
Control modules: 24VDC
Pass-through signals: 5 Amp/24VDC |
|
|
DB12-M,DB10-T
|
|
|
Módulo DeviceNet de Capacidad de Rápida Conexión con Prevención Arc, sin Bypass TSI, Enganche de Bloque sin Herramienta. |
|
|
|
Control modules - 24VDC
Pass-through signals - 3 Amp/30VDC |
|
|
DB12-M,DB13-T
|
|
|
Módulo DeviceNet con Capacidad de Rápida Conexión con (2) Miniconectores para la interfaz de DeviceNet y Energía Auxiliar, TSI en Herramientas sin Bypass de RTL y Función para Deshabilitar Enganche, Prevención Arc aplicada a la energía Aux1, Aux2, y CAN V+. Detección de Bloquear, Desbloquear y RTL con cables LED en el Máster (Sensores de RTL en Series). ID de Herramientas desde el Módulo de Herramientas también soportada. |
|
|
|
Control modules - 24VDC
Pass-through signals - 3 Amp/30VDC |
|
|
DB15-M,DB10-T
|
|
|
Quick Connect Capable DeviceNet Module with (2) Mini Connectors for DeviceNet and Aux. Power Interface, TSI on Tool, No RTL Bypass, Arc Prevention applied to Aux1, Aux2, and CAN V+ power. Lock, Unlock, and RTL sensing with LED cables on the Master (RTL Sensors in Series). Includes 3-Pin M8 Connector for Air Supply Pressure Monitoring. Tool-ID from the Tool module also supported. |
|
|
|
Control modules - 24VDC
Pass-through signals - 3 Amp/30VDC |
|
|
DB2
|
|
|
Módulo DeviceNet, que da Soporte a una Válvula Integrada con Enclavamiento del Estante de Herramientas (TSI) en las Herramientas. |
|
|
|
|
Módulos DeviceNet
|
DU3
|
|
|
DeviceNet Module with (2) Mini Connectors for DeviceNet and Aux. Power Interface. Supports Double Solenoid Valve Adapter. Supports Air Supply monitoring via Pressure Switch input. Arc Prevention applied to Aux1, Aux2, and CAN V+ power. Supports NPN Lock, Unlock, Thermal 1, and RTL sensors (RTL sensors in series). Tool-ID from the Tool module also supported. |
|
|
|
|
Módulos DeviceNet Reduntantes Duales
|
There are currently no modules in this category.
|
|
|
Módulos Discretos
|
SA10
|
|
|
Conector Discreto de 24 pines MS3102, Soporta Sensores NPN de Bloquear, Desbloquear y RTL (RTL en Serie), Sin Control de la Válvula Integrada, Sin ID de Herramientas o TSI en Herramientas. |
|
|
|
Control signals - 24VDC
Pass-through signals - 5 Amp/250V |
|
|
SA12-M,SA2-T
|
|
|
Módulo Discreto, Conector de 19 Pines MS3102, Soporta Sensores PNP de Bloquear, Desbloquear y RTL, Sin Control de Válvula Integrada. |
|
|
|
Control signals - 24VDC
Pass-through signals - 5 Amp/250V |
|
|
SA2,SA3
|
|
|
Módulo Discreto, 26 pines de Anfenol, Bloque de 19 pines, Soporta Sensores de Bloquear/Desbloquear/R1/R2, ID de Herramientas en el costado de Herramientas. (No tiene el propósito para utilizarse con una válvula integrada). |
|
|
|
Control signals - 24VDC
Pass-through signals - 5 Amp/250V |
|
|
SC29
|
|
|
Harting Module, Supports Servo Power and Redundant Encoder and Ethernet Signals, Supports L/U/R1/R2 Sensors and Integrated Valve, Supports TSI on the Tool with no RTL bypass. |
|
|
|
Signal - 5 Amp/250V
Motor Power - 13 Amp/400V
Ethernet Signals - 2 Amp/60V
Tool Changer (TSI) - 4 Amp/24V
Tool Changer (Tool-ID) - 100 mA/50V
Tool Changer (Valve Control) - 19-29V
Sensors (Lock, Unlock, RTL) - 10-30 VDC oper voltage, 150mA Oper Current |
|
|
SC30
|
|
|
Discrete Module, 25-Pin HAN-D Harting Connector, 5-Pin Minifast Aux Power and 4-Pin M12 D-Coded Connector with Redundant PROFINET Pass-Through, Supports L/U/R1/R2 Sensors and Integrated Valve, 0-9 Rotary Switch Tool-ID, Supports TSI with no RTL bypass on the Tool |
|
|
|
Aux Power - 5 Amp/250V
Signal - 5 Amp/250V
PROFINET Signals - 4 Amp/250V
Tool Changer (TSI) - 4 Amp/24V
Tool Changer (Tool-ID) - 100 mA/50V
Tool Changer (Valve Control - 19-29V
Sensors (L,U,RTL) - 10-30VDC Operational Voltage, 150 mA Operational Current |
|
|
SC32
|
|
|
Harting Module with Redundant Wiring, Supports Servo Power and Encoder Signals, PROFIBUS/DeviceNet Pass-through, Supports L/U/R1/R2 Sensors and Integrated Valve, Supports TSI on the Tool and Master. |
|
|
|
Power - 15 Amp/500V (Harting Block c)
Signal - 3 Amp/24V (Harting Block b)
PROFIBUS/DeviceNet Pass-through - 3 Amp/24V (Harting Block a)
TSI - 1 Amp/30V
Tool-ID - 100mA/24V |
|
|
SC7
|
|
|
Módulo Harting, Soporta Energía Servo y Señales del Codificador, Paso de PROFIBUS/DeviceNet, Soporta Sensores L/U/R1/R2 y Válvula Integrada, ID de Herramientas 0-9, Soporta TSI en las Herramientas. |
|
|
|
Power - 7 @ 15 Amp/500V
Signal - 14 @ 3 Amp/24V
Tool Changer - 6 @ 3 Amp/24V
Fieldbus - 12 @ 3 Amp/24V |
|
|
SC8
|
|
|
Módulo Harting que soporta Energía Servo y Señales del Codificador, Paso de PROFIBUS, Soporta Sensores L/U/R1/R2 y Válvula Integrada, Soporta TSI en Herramientas. |
|
|
|
Power - 7 @ 13 Amp/500V
Signal - 17 @ 3 Amp/24V
Tool Changer (TSI and Tool-ID) - 6 @ 3 Amp/24V
Fieldbus - 2 @ 3 Amp/24V |
|
|
SD2
|
|
|
Módulo Discreto con M23, conector de 17 pines, Soporte del Bloque I/O PROFIBUS y TSI en Herramientas. |
|
|
|
Control Signals - 24VDC
Pass-through Signals - 5 Amp/250V |
|
|
VA2
|
|
|
Módulo Discreto, Anfenol de 26 pines, Bloque de 19 pines, Soporta sensores l/U/R1/R2 y Válvula Integrada, funciona con módulos SA del costado de Herramientas, TSI en el Máster. |
|
|
|
Control Signals - 24VDC
Pass-through Signals - 5 Amp/250V |
|
|
VA6 Family
|
|
|
Módulo Discreto, 26 Pines de Anfenol, Bloque de 19 Pines, Soporta Sensores L/U/R1/R2 con Paso de Válvula Integrada VA6-M Soporta TSI en el Costado del Máster y Funciona con las Herramientas Serie SA. |
|
|
|
Control Signals - 24VDC
Pass-through Signals - 5 Amp/250V |
|
|
VA7 Family
|
|
|
Módulo Discreto, Conector M27 Turck de 26 pines, Bloque de 19 Pines, Soporta Sensores L/U/R1/R2 con Paso de Válvula Integrada. VA7-M Soporta TSI en el Costado del Máster y Funciona con las Herramientas de la Serie SA. |
|
|
|
Control Signals - 24VDC
Pass-through Signals - 5 Amp/250V |
|
|
VB11
|
|
|
Módulo Discreto, Soporta Sensores PNP L/U/R1/R2 y Válvula Integrada, Conector DDK de 35 Pines(Estilo MS), TSI en Herramientas, ID de Herramientas 0-9, 22 Pasos |
|
|
|
Control signals - 24VDC
Pass-through signals - 5 Amp/250V |
|
|
VB12-M,VB13-M,VB12-T
|
|
|
Módulo de Señal Discreta con Conector de Bayoneta PT de 36 Pines, TSI en el Máster, Soporta Sensores PNP L/U/R1/R2 y Válvula Integrada (R1 y R2 en Serie). (Conector VB13-M montado en el Bloque del Espaciador de Ángulo Recto). |
|
|
|
Control Signals - 24VDC
Pass-through Signals - 5 Amp/250V |
|
|
VB18
|
|
|
Módulo de Señal Discreta con 35 pines de Anfenol en el Máster, 24 pines de Anfenol en Herramientas. Energía Auxiliar de 5 pines, paso de PROFINET de 4 pines, bloques de 17 y 26 pines. |
|
|
|
5 Amp/250V max
Tool-ID Switch - 0.1 Amp/30V |
|
|
VB2
|
|
|
Módulo Discreto, Anfenol de 26 pines, Bloque de 19 pines, Soporta Sensores L/U/R1/R2 y Válvula Integrada, TSI en Herramientas. |
|
|
|
Control Signals - 24VDC
Pass-through Signals - 5 Amp/250V |
|
|
VB5
|
|
|
Módulo Discreto, 19 pines de Anfenol, Bloque de 19 pines, Enclavamiento del Estante de Herramientas del Costado de Herramientas, 10 Pasos, Sensores NPN (inmersión) de Bloqueado, Desbloqueado y RTL. |
|
|
|
Control Signals - 24VDC
Pass-through Signals - 5 Amp/250V |
|
|
VB7 Family
|
|
|
Módulo Discreto, Anfenol de 26 pines, Bloque de 19 pines, Soporta sensores L/U/R1/R2 con Paso de Válvula Integrada Utiliza Válvula de uno o dos solenoides), TSI en Herramientas e ID de Herramientas (Se empareja con Herramientas Serie VB). |
|
|
|
Control Signals - 24VDC
Pass-through Signals - 5 Amp/250V |
|
|
VB7Z1 Family
|
|
|
Discrete Signal Module with 26-Pin Amphenol, 19-pin Block, Supports L/U/R1/R2 Sensors with Integrated Valve Pass-yhrough (Uses Double Solenoid Valve) **Supports Tool Stand Interlock on Tool Side. |
|
|
|
Signal Pass-through - 5 Amp/250V max. |
|
|
VB8
|
|
|
Módulo Discreto, Soporta Sensores NPT L/U/R1/R2 y Válvula Integrada, Conector DDK de 37 Pines, TSI en Herramientas, ID de Herramientas 0-7. |
|
|
|
Control Signals - 24VDC
Pass-through Signals - 5 Amp/250V |
|
|
VD2
|
|
|
Módulo Discreto, 26 pines de Anfenol, Conexión I/O Remota, Bloque de 19 pines, Soporta Sensores L/U/R1/R2 y Válvula Integrada, TSI en Herramientas. |
|
|
|
Control Signals - 24 VDC
Pass-through Signals - 5 Amp/250V
Remote I/O pass-through signals - 4 Amp/250V |
|
|
VF2
|
|
|
Discreto, 26 pines de Anfenol, Bloque de 19 pines. Soporta Sensores L/U/R1/R2 y Válvula Integrada. VF2-M Soporta TSI en el costado de Herramientas. |
|
|
|
Control Signals - 12 @ 5 Amp/250V, 5 Amp / 24VDC |
|
|
VJ4
|
|
|
Paso de Energía Interbus y Módulo de Conexión I/O con Prevención Arc. |
|
|
|
Input Power - 5 Amp/12-30VDC
Output Power - 5 Amp/21-26VDC |
|
|
VK2
|
|
|
Módulo de Vínculo de IO con (4) Conectores M12 de 5 Pines para el Paso del Vínculo I/O, (3) Conectores M12 de 5 Pines para el Control de la Válvula y Entradas del Sensor de Bloqueado, Desbloqueado y Listo para Bloquear. Soporta el Control de la Válvula Integrada. |
|
|
|
Control Signals - 24VDC
Pass-through Signals - 3 Amp/24V |
|
|
|
Módulos EtherNet/IP
|
CYE1
|
|
|
Ethernet IP Module with intergrated 4-Pin D-Coded M12 connector for Ethernet communication, 4-Pin Minfast Connector for US1 and US2 power, TSI on the Tool, Arc Prevention applied to US1 and US2, and integrated web server for tool changer communication configuration and Ethernet switch management. Lock, Unlock, RTL sensing and IP address setting option on the Master. Tool-ID from the Tool module also supported. |
|
|
|
Input Power: 4A, 21.6-30V
Output Power 7A, 20-30V |
|
|
DKF
|
|
|
Módulo de EtherNet/IP con interruptor de Ethernet integrado, soporta la funcionalidad DHCP y Rápida Conexión EtherNet/IP. |
|
|
|
Control Signals - 24VDC
Pass-through Signals - 5 Amp/250V |
|
|
DKG-M,DKF-T,DKQ-T
|
|
|
Módulo EtherNet/IP con interruptor integrado con soporte de DHCP, Rápida Conexión, Paso Entrada y de Energía Auxiliar Conmutada, TSI en Herramientas. Conector M12 con código M12 para comunicación Ethernet, Miniconector de 4 pines para Conector de Pines para Energía de Entrada/Energía Auxiliar Conmutada. |
|
|
|
Control Signals - 24VDC
Pass-through Signals - 5 Amp/250V |
|
|
DKK-M,DKF-T
|
|
|
Módulo EthernNet/IP con interruptor de Ethernet integrado que soporta la funcionalidad DHCP y Rápida Conexión de EtherNet/IPt, paso de Entrada y Energía Auxiliar Conmutada, Sin TSI de Bypass de RTL en Herramientas. Conector Hembra M12 con Código D para comunicación Ethernet, un Miniconector Macho de 4 Pines para la energía de entrada y Energía Auxiliar Conmutada. La Detección de Bloqueo, Desbloqueo y RTL con cables LED en el Máster e ID de Herramientas desde el módulo de Herramientas también se soporta. Circuito de Prevención Arc aplicada al AUX Conmutado y energía de entrada. |
|
|
|
Control Signals - 24VDC
Pass-through Signals - 5 Amp/250V |
|
|
DKL
|
|
|
EtherNet/IP Module with Integrated Ethernet Switch, 4-Pin M12 D-Coded connector for Ethernet communication, 4-Pin MiniFast Connector for Input and Output Power, TSI on the Tool, Arc Prevention applied to Input and Output power. Lock, Unlock, and RTL sensing with LED cables on the Master. Tool-ID from the Tool Module also supported. Safety circuit meets ISO13849 PLd |
|
|
|
Power - 180 mA @ 24 VDC
Valve Power (switched Auxiliary Power) - 250 mA @ 24 VDC (Solenoid Valve) (only when locking or unlocking Tool Changer)
Pass-through Power - 5 Amp/20-29 VDC |
|
|
DKP
|
|
|
EtherNet/IP Module with integrated Ethernet switch, supports DHCP functionality and EtherNet/IP Quick Connect, Input and Aux. Power pass-through, TSI on Tool. M12 D-coded Connector for Ethernet communication, Mini 4-Pin Connector for Output, Input and Logic Power. Lock, Unlock and RTL sensing with LED cables on the Master and Tool-ID from the Tool module are also supported. Supports RTL Bypass with both sensors in series. Arc Prevention Circuit applied to Aux. Switched and Aux. Unswitched. |
|
|
|
Pass-through Power - 5 Amp/24VDC max. |
|
|
DKR
|
|
|
EtherNet/IP Module with integrated Ethernet switch, 4-Pin M12 D-Coded connector for Ethernet communication, Mini 4-Pin Male Connector for Switched and Unswitched Auxiliary Power, 5-Pin M12 to support TSI on the Tool, 4-Pin M12 Connector to support Thermal 1 Input, 0-99999 Tool-ID through to the Master moduleTSI on the Tool, Arc Prevention applied to Switched and Unswitched Aux power. Lock, Unlock, and RTL sensing with LED cables on the Master. Tool-ID from the Tool module also supported. Safety circuit meets ISO13849 PLd |
|
|
|
DKRZ1
|
|
|
EtherNet/IP Module with integrated Ethernet switch, 4-Pin M12 D-Coded connector for Ethernet communication, Mini 4-Pin Male Connector for Switched and Unswitched Auxiliary Power, 5-Pin M12 to support TSI on the Tool, 4-Pin M12 Connector to support Thermal 1 Input, 0-99999 Tool-ID through to the Master module. Matching Ethernet ports on Master and Tool. TSI on the Tool, Arc Prevention applied to Switched and Unswitched Aux power. Lock, Unlock, and RTL sensing with LED cables on the Master. Tool-ID from the Tool module also supported. Safety circuit meets ISO13849 PLd. |
|
|
|
DKS
|
|
|
EtherNet/IP Module with integrated Ethernet switch supporting DHCP functionality and EtherNet/IP Quick Connect, Input and Switched Auxillary Power pass-through, Non-RTL Bypassed TSI on Tool. M12 D-coded Female Connector for Ethernet communication, one Mini 5-Pin Male Connector for Input power and for Switched Auxillary Power. Lock, Unlock and RTL sensing with LED cables. Tool side has 0-9 Tool-ID switches. |
|
|
|
Pass-through Signals - 5 Amp/24VDC max.
Power - 180 mA @ 24VDC, Master only (Unlocked sensor "ON", Locked)
Valve Power (switched Auxiliary Power) - 250 mA @ 24VDC (Solenoid Valve) (only when locking/unlocking Tool Changer)
Tool-ID switch - 0.1 Amp/30VDC |
|
|
|
Módulos InstaTool
|
There are currently no modules in this category.
|
|
|
Módulos PROFIBUS
|
VG3
|
|
|
Módulo Discreto de Pase PROFIBUS. |
|
|
|
|
Módulos PROFINET
|
DL10
|
|
|
Módulo PROFINET con interruptor integrado de Ethernet, conector M12 de 4 pines con código D para comunicación de PROFINET, miniconector de 5 pines para energía US1 y US2, TSI en Herramientas, Prevención Arc aplicada en la energía US1 y US2. Detección de Bloqueado, Desbloqueado y RTL con cables LED en el Máster. ID de Herramientas también soportado desde el módulo de Herramientas. |
|
|
|
Safe Power - 24 VDC I/O+ and 24VDC
10 Amp/ 12-30VDC |
|
|
DL12
|
|
|
PROFINET Module with integrated Ethernet switch. D-Coded 4-Pin M12 connector for PROFINET communication, 5-pole Mini Connector for Switched and Unswitched Auxiliary power. Arc Prevention applied to Switched and Unswitched Auxiliary power. Lock, Unlock, and RTL sensing with LED cables on the Master. Tool-ID from the Tool module also supported. Safety circuit meets ISO13849 PLd. |
|
|
|
Power Pass Through - 10 Amp
Signal - 3 Amp/30VDC max. |
|
|
DL16
|
|
|
PROFINET Module with integrated Ethernet switch, D-Coded 4-Pin M12 connector for PROFINET communication, 5-Pin Mini Connector for US1 and US2 power, TSI on the Tool, Arc Prevention applied to US1 and US2 power. Lock, Unlock, and RTL sensing with LED cables on the Master. Tool-ID from the Tool module also supported. |
|
|
|
Auxiliary Power: 9 Amp / 20-29 VDC
Profinet: 1 Amp / 30VDC max
Note: Arc prevention is applied to US1 and US2 power. |
|
|
DL4
|
|
|
Módulo PROFINET con Ethernet de Introducción-Extracción RJ45 y Conectores de Energía de Introducción-Extracción de 5 Pines, Prevención Arc. ID de Herramientas 0-99999. TSI en el costado de Herramientas. |
|
|
|
US1 and US2 Power - 10 Amp/12-30VDC |
|
|
DL8
|
|
|
PROFINET Module with integrated Ethernet switch, RJ45 Push-Pull connector for Ethernet communication, 5-Pin Push-Pull Connector for US1 and US2 power, 10-Pin Push-Pull Hybrid Connection, TSI on the Tool, Arc Prevention applied to US1 and US2 power. Lock, Unlock, and RTL sensing with LED cables on the Master. 5-digit Tool-ID from the Tool module also supported. Safety circuit meets ISO13849 PLd. |
|
|
|
Power Pass-through - 10 Amp
Signal - 3 Amp/30 VDC max. |
|
|
DT4
|
|
|
PROFINET Pass-Through Module w/ Aux. Power Pass-Through for Utility Coupler Applications. M12 D-coded Female Connector for PROFINET communication, Mini 5-Pin Male Connector for Switched and Un-Switched Aux. Power circuits. Two (2) M12 4-Pin Connectors for Connection Verification signal and Arc Prevention Control. Arc Prevention Circuit applied to Aux. Switched, Aux. Unswitched. |
|
|
|
Power - 8 Amp/12-30VDC
Signal - 3 Amp/250V max. |
|
|
| Versiones del Producto Anterior: |
|
AQ3-T
|
,
|
B15
|
,
|
DD3
|
,
|
DKD
|
,
|
DU2
|
,
|
EC6
|
,
|
FF3
|
,
|
FH6
|
,
|
GB8 Family
|
,
|
PA5
|
,
|
RF5
|
,
|
RM19
|
,
|
SM19
| |
|
Custom Application Tool Changer Models and Modules
|
|