简体中文  | English  | Español  | 日本語  | Português
Skip Navigation Links
Contact Us
Site Map
F/T Sensor: Mini40 IP65/IP68  
Skip Navigation LinksHome > Products > Force/Torque Sensors > F/T Models > Mini40 IP65/IP68

Product Advantages
  • The Mini40 has a compact, low-profile design with high capacity.
  • Extremely-High Strength: IP65 rated for protection against water spray. IP68 (4m) rated for submersion in fresh water to a depth of 4m. EDM wire-cut from high yield-strength stainless steel. Maximum allowable overload values are 4.2 to 18.9 times rated capacities.
  • High Signal-to-Noise Ratio: Silicon strain gages provide a signal 75 times stronger than conventional foil gages. This signal is amplified, resulting in near-zero noise distortion.

Note(s): IP68 sensors exhibit a decrease in Fz range related to submersion depth. See IP68 F/T Transducer Details in the Manuals tab under Addendums for detailed descriptions or contact your account representative.
Typical Applications
  • Telerobotics
  • Wet applications
  • Mechanical assembly
Mini40 IP65 Transducer
Mini40 IP65 Transducer

Ranges and ResolutionsSpecificationsDrawingsDocuments3D CAD Models

Select a system type.  (For more information on system types, please see our F/T Product Description page.)

Standard Calibrations (US)

US-5-105 lbf15 lbf10 lbf-in10 lbf-in1/800 lbf1/400 lbf1/800 lbf-in1/800 lbf-in
US-10-2010 lbf30 lbf20 lbf-in20 lbf-in1/400 lbf1/200 lbf1/400 lbf-in1/400 lbf-in
US-20-4020 lbf60 lbf40 lbf-in40 lbf-in1/200 lbf1/100 lbf1/200 lbf-in1/200 lbf-in

 View Standard (US) Complex Loading Graph

Metric Calibrations (SI)

SI-20-120 N60 N1 Nm1 Nm1/200 N1/100 N1/8000 Nm1/8000 Nm
SI-40-240 N120 N2 Nm2 Nm1/100 N1/50 N1/4000 Nm1/4000 Nm
SI-80-480 N240 N4 Nm4 Nm1/50 N1/25 N1/2000 Nm1/2000 Nm

 View Metric (SI) Complex Loading Graph

  *The resolution is typical for most applications and can be improved with filtering.
 **Resolutions quoted are the effective resolution after dropping four counts of noise.
***Applied loads must be within range in each of the six axes for the F/T sensor to measure correctly.

ATI's F/T calibrations are traceable to the National Institute of Standards and Technology (NIST). ATI certifies sensors are calibrated in accordance with
 applicable ATI procedures. These procedures are compliant with the ISO 9001 standard to ensure that products are within ATI specifications.

Contact your sales representative for accuracy information.

ATI Industrial Automation
1031 Goodworth Dr. | Apex, NC 27539 USA
Phone:+1 919-772-0115 | Fax:+1 919-772-8259
Robotic Tool Changers
Force/Torque Sensors
Utility Couplers
Manual Tool Changers
Material Removal Tools
Compliance Devices        
Robotic Collision Sensors
3D CAD Models
Credit Application
Privacy Policy
Contact Us
Sales and Support
Request Info
Register Products
Driving Directions
Site Map
© 2020 ATI Industrial Automation, Inc. All rights reserved.
 Join RIA Today

 Facebook_Icon   Twitter_Icon   YouTube_Icon