模块 | 模块类型 | 描述 |
CL5 | 电模块 | 4 Amp/125V Signal Module Assembly, Potted with 5-pin Binder Connector, Series 713, M12x1, Twisted Pair Wires |
DJ3 | 双冗余DeviceNet 模块 | Dual Redundant TSI DeviceNet Module, Supporting Advanced Diagnostic Reporting, Standard Mini Connectors for DeviceNet and Auxiliary Power, (2) TSI on Tool,Tool ID through Master-side |
DJ4 | 双冗余DeviceNet 模块 | Dual Redundant TSI DeviceNet Module, Supporting Advanced Diagnostic Reporting, Harting Connector on Master-side and Standard Mini Connectors for DeviceNet and Auxiliary Power on Tool-side, (2) TSI on Tool, Tool ID Supported through Master-side |
DJ6 | 双冗余DeviceNet 模块 | Dual Redundant TSI DeviceNet Module, with (2) TSI on Tool, Mini Connectors, Supporting a Spare Output for Air Blow Off |
DJ7-M,DJ6-T | 双冗余DeviceNet 模块 | Dual Redundant DeviceNet Module w/(2) Mini Connectors for DNet & Aux Power Interface. Single/Dual Solenoid Valve. Arc Prevention applied to Aux1,Aux2,CAN V+ power. Lock,Unlock,RTL sensing w/LED cables on Master. (2) Mech Switch TSI & 5 Switch Tool-ID. |
DJ8 | 双冗余DeviceNet 模块 | Dual Redundant TSI DeviceNet Module with (2) Mini Connectors for DeviceNet and Aux. Power Interface; Supports Single and Dual Solenoid Valve; Arc Prevention applied to Aux1, Aux2, and CAN V+ power; Lock, Unlock, and RTL sensing with LED cables on the Master; Tool-ID from the Tool module also supported |
HB7 | 液压/气模块 | Hydraulic/Air Module, (1) 7200 PSI G1/2, (1) 100 PSI G3/8 Checked Port |
UDK10 | 电模块 | Special 10-pin electrical module supporting Roland UDK10 sheet detector |
VA8-M,SA16-T | 离散的模块 | Discrete Potted Module, 26-Pin Turck M27 Connector, 19-Pin Block, Supports L/U/R1/R2 Sensors with Integrated Valve Pass-through. 19-Socket M16 Connector, 19 Pass-throughs on Tool side |
VB19 | 离散的模块 | Discrete Signal Module w/19-pin M23, 19-pin block, Supports TSI on Tool |
VH10 | 离散的模块 | Discrete Signal Module with (6) M12, 4-Pin Connectors for Integrated Valve control, 0-9 Tool-ID, Aux. Power, and L/U/R1/R2 sensor interface. (1) M12, D-Coded connector for PROFINET Pass-through. Supports TSI on the Tool. |